Data module

Circuit Design’s RF modules contain all the high frequency components required for transmitting data. All these components are shielded by the metal case.
Specific protocols are not incorporated. Your own original protocol can be used, but must follow the requirements of maximum pulse width.
Digital coding such as Manchester coding is recommended for meeting the maximum pulse requirement.

Transmitter and receiver

Common specs : Narrow band radio / FSK modulation

				RF							Supply power			Physical dimensions
	Type	Certificate	RoHS	Frequency	Channel	Ch spacing	RF power	Data input	RX Sensitivity (12 dB / SINAD)	Data rate	Supply voltage	Supply current	Operating temp. range (ºC)	Size (mm)	Weight
CDP-TX-02E(P) CDP-RX-02E(P) [434 MHz]	Transmitter Receiver	CE	Yes	434 MHz band	32	25 kHz	1/10 mW selectable	Digital (max.pulse width 20 ms)	-120 dBm	4800 bps	3.0 to 12 V (TX) 3.0 to 12 V (RX)	43 mA / TX 30 mA / RX	-20 to 60	36 x 26 x 10 / TX 50 x 30 x 9 / RX	14 g / TX 20 g / RX
CDP-TX-07M(P) CDP-RX-07M(P) 434 MHz	Transmitter Receiver	CE	Yes	434 MHz band	4	25 kHz	10 mW	Digital (max.pulse width 20 ms)	-120 dBm	4800 bps	2.2 to 5.5 V (TX) 3.0 to 14 V (RX)	20 mA / TX 23 mA / RX	-20 to 65	22 x 12 x 4.5 / TX 36 x 26 x 8 / RX	2 g / TX 13 g / RX
CDP-TX-05M-R CDP-RX-05M-R 434 MHz 869 MHz	Transmitter Receiver	CE	Yes	434 MHz band 869 MHz band	4	25 kHz	10 mW (434 MHz) 5 mW (869 MHz)	Digital (max.pulse width 20 ms)	-120 dBm (434 MHz) -116 dBm (869 MHz)	4800 bps	2.2 to 5.5 V (TX) 3.0 to 14 V (RX)	20 mA / TX 434 MHz 16.5 mA / TX 869 MHz 28 mA / RX	-20 to 65	22 x 12 x 6 / TX 36 x 26 x 8 / RX	3 g / TX 13 g / RX
CDP-TX-05M-R CDP-RX-05M-R 915 MHz	Transmitter Receiver	–	Yes	915 MHz band	4	25 kHz	1 mW	Digital (max.pulse width 20 ms)	-111 dBm	4800 bps	2.2 to 5.5 V (TX) 3.0 to 14 V (RX)	14 mA / TX 28 mA / RX	-20 to 65	22 x 12 x 6 / TX 36 x 26 x 8 / RX	3 g / TX 13 g / RX

Data transceiver

Common specs : Narrow band radio / FSK modulation

		RF							Supply power			Physical dimensions
	Applicable standard	Frequency	No. of Channels	Ch spacing	RF power	Data input	RX Sensitivity (BER 1% with PN9)	Data rate	Supply voltage	Supply current	Operating temp. range (ºC)	Size (mm)	Weight
LMD-400-R	FCC Part 90.217 IC RSS-119	(FCC Part 90.217) (IC RSS-119) 458 – 462.5 MHz	User programmable	12.5 kHz	10 mW	Digital Max.pulse width 20ms	-116 dBm (458 – 462.5 MHz)	4800 bps max	3.0 to 5.5 V	52 mA / TX 42 mA / RX	-20 to 60	50 x 30 x 9	25 g
STD-302Z	EN 300 220 (434 MHz, 869 MHz)	(STD-302Z) 419 MHz 429 MHz 434 MHz 447 MHz 458 MHz 869 MHz	User programmable	25 kHz	5 mW @ (869 MHz) 10 mW @ (others)	Digital Max.pulse width 15ms @ (419,434,458,869 MHz) Max.pulse width 20ms @ (429, 447 MHz)	-116 dBm -113 dBm (434 MHz) (869 MHz) -115 dBm (419 MHz) -120 dBm (429 MHz) -120 dBm (447 MHz) -116 dBm (458 MHz)	9600 bps max @ (419,434,458,869 MHz) 4800 bps max @ (429, 447 MHz)	3.0 to 5.5 V	44 mA / TX (434MHz) 28 mA / RX (434MHz) 35 mA typ. / TX	-20 to 60	50 x 30 x 9	25 g
STD-601 400MHz	None	429 MHz 434 MHz 447 MHz 458 MHz	271 ch	25 kHz	1 mW 5 mW 10 mW 20 mW 25 mW 50 mW	Digital Max.pulse width 10ms	-113 dBm (9600 bps) -117 dBm (4800 bps)	1200 / 2400 / 4800 / 9600 / 19200 bps	3.0 to 5.5 V	35 mA typ. / TX 19 mA typ. / RX	-20 C to 65*	20 x 32 x 5	4.5 g
STD-601 434MHz	EN 300 220	434 MHz	137 ch	25 kHz	1 mW 5 mW 10 mW	Digital Max.pulse width 10ms	-113 dBm (9600 bps) -117 dBm (4800 bps)	4800 / 9600 bps	3.0 to 5.5 V	26 mA typ. / TX 19 mA typ. / RX	-20 C to 65*	20 x 32 x 5	4.5 g

* Operating temperature outside of this range, see operation guide for details.

Radio module

・
・
・
・
・

Telecommand

MU-1-R and MU-2-R provide simple dedicated commands for modem control and the data communication. By using dedicated commands, you can change the RF channel, System ID and UART parameter, and make the data transmission easily. Optional interface boards are available.

Common specs : FSK modulation

・
・
・
・
・

Audio module

MU-1-R and MU-2-R provide simple dedicated commands for modem control and the data communication. By using dedicated commands, you can change the RF channel, System ID and UART parameter, and make the data transmission easily. Optional interface boards are available.

Common specs : FSK modulation

・
・
・
・
・

Accessaories

MU-1-R and MU-2-R provide simple dedicated commands for modem control and the data communication. By using dedicated commands, you can change the RF channel, System ID and UART parameter, and make the data transmission easily. Optional interface boards are available.

Common specs : FSK modulation

・
・
・
・
・